Universal Grout Colorant and Sealer UltraCare Grout Refresh is a nonflammable, ready-to-use, water-based, polymer-modified colorant and sealer for grout joints. It can be applied onto and bonds to cement, epoxy, urethane and acrylic grouts.

Quick and easy grout color change with MAPEI’s UltraCare Grout Refresh For more information, visit www.mapei.us or click the links belowUltraCare Grout Refre...

Using a clean, damp microfiber towel, gently rub the tile surface to remove the colorant, avoiding the actual grout joint. Early wash method: Within 5 minutes of application, wipe the tile and grout in the same direction as the grout line with a folded paper towel or dry microfiber towel. Protect from traffic for 2 hours and from water for 24 ...

Make grout look brand new again with Mapei Grout Refresh. It's as easy as applying this new formula with a brush, letting it set and wiping the area clean. Give tile floors, a kitchen tile ...

Will UltraCare Grout Refresh stick to sealed grout? In order for MAPEI's UltraCare Grout Refresh to bond effectively, all sealers on the existing grout must be removed. MAPEI recommends contacting the sealer manufacturer for removal instructions.

UltraCare Grout Refresh Universal Grout Colorant and Sealer UltraCare Grout Refresh is a nonflammable, ready-to-use, water-based, polymer-modified colorant and sealer for grout joints. It can be applied onto and bonds to cement, epoxy, urethane and acrylic grouts.

PRODUCT APPLICATION Read all installation instructions thoroughly before installation. properly. Deposit a ne bead of UltraCare Grout Refresh into the middle of the grout joint, avoiding the tile surface as much a

Quickly change your grout color with Mapei's Grout Refresh.

Dec 14, 2017 · Do not clean with solvent-based cleaners once UltraCare Grout Refresh has been applied. nto the tile. Contact MAPEI's Technical Services Department for re Do not use in submerged areas, such as pools or hot tubs, or in areas subject to hydrostatic pressure. Grout should be cured for at least 48 hours before being treated with UltraCare Grout ...

Read all installation instructions thoroughly before installation. as possible. Spread evenly using a toothbrush or grout stain applicator, working the colorant into the grout joint using a back-and-forth motion to allow the colorant to penetr te the grout. Apply UltraCare Grout Refresh in a thin coat; if applied too thickly, the product will not