1.1 This specification covers Controlled Low Strength Materials, CLSM, manufactured and delivered to a purchaser in a freshly mixed and unhardened state. Based on the application, the Engineer shall specify one or more of the performance properties and material parameters from tests listed in Table 1.1.

"Flowable-Fill"-As described in the American Concrete Institute's (ACI) Committee 229 report, it is a Controlled Low Strength Material (CLSM) used as primary backfill or alternate to standard soil or stone backfill.

Flowable fill will consist of a mixture of Portland cement, fly ash, fine aggregate, air entraining admixture, and water. Flowable fill is intended to contain a low cementitious content for reduced strength development.

FLOWABLE FILL sets in 45 minutes allowing early load application. USES: Use FLOWABLE FILL for filling utility cuts, pipe bedding, runway and pavement subbase, and backfilling foundations.

Flowable fill is a mixture of Portland cement, fly ash, fine aggregate, air entraining admixture, and water. Flowable fill contains a low cementious content for reduced strength development. 1. Submit mix designs for flowable fill to the Engineer for …

Mix the flowable fill using a central-mixed concrete plant, ready-mix concrete truck, pug mill, or other approved method. Furnish all labor, equipment, tools, containers, and molds required for sampling, making, transporting, curing, removal, and disposal of test specimens.

Flowable Fill is a mixture of Rapid Set hydraulic cement, aggregate, and water designed for soil replacement or reinforcement. Flowable Fill is a self-compacting material suitable in applications requiring Controlled Low Strength Material (CLSM) or Controlled Density Fill (CDF).

Flowable fill is a fluid material, which prior to setting, will exert a high fluid pressure on formwork, wall/embankments, or other containment structures. The Contractor shall design all formwork or other containment structures accordingly.

Flowable fill is a self-compacting low strength material with a flowable consistency that is used as an economical fill or backfill material as an alternative to compacted granular fill.

Mix the flowable fill using a central-mixed concrete plant, ready-mix concrete truck, pug mill, or other approved method. The Engineer will sample and test in accordance with Table 2.