Using a clean, damp microfiber towel, gently rub the tile surface to remove the colorant, avoiding the actual grout joint. Early wash method: Within 5 minutes of application, wipe the tile and …

MAPEI's UltraCare Grout Refresh can be used to change a white grout to a black grout, or a dark-brown grout to a light-beige grout, etc. Typically, two coats are needed when making a drastic …

UltraCare Grout Refresh is a nonflammable, ready-to-use, water-based, polymer-modified colorant and sealer for grout joints. It can be applied onto and bonds to cement, epoxy, …

Remove excess grout from the tile surface by holding the rubber float at a 90-degree angle (perpendicular to the tile surface) while moving it across the tile in a diagonal direction.

Keep a damp sponge nearby to wipe off the excess UltraCare Grout Refresh from the tile surface as you go. UltraCare Grout Refresh can also be applied using a small piece of sponge, a foam …

The “wet method” should be used on textured tile surfaces that have slightly recessed grout joints. The “dry method” should be used on smooth or polished surfaces with joints that are more …

Give your tile floors or walls new life with a simple grout refresh. Mapei Grout Refresh acts as a stain and sealer. It sets in deep within grout joints and protects your floors, erases stains, and …

UltraCare Grout Refresh is a nonflammable, ready-to-use, water-based, polymer-modified colorant and sealer for grout joints. It can be applied onto and bonds to cement, epoxy, …

Use UltraCare Grout Refresh to recolor and seal the joints at the same time. The varying density and porosity of the tile and natural stone caused the grout to dry blotchy and to shade. For …

All it takes is a toothbrush or similar nylon brush to spread UltraCare Grout Refresh over the grout, and a bucket of clean water and a clean, damp sponge to remove the excess. To learn …

Grout Refresh is a nonflammable, ready-to-use, water-based, polymer-modified colorant and sealer for grout joints. It can be applied onto and bonds to cement, epoxy, urethane and acrylic …

So, if the existing grout is damaged, then at least 2/3 of the depth of the grout joint must be removed before regrouting. Note: If the existing grout is simply discolored, MAPEI’s UltraCare …

Dec 14, 2017 · UltraCare Grout Refresh is a nonflammable, ready-to-use, water-based, polymer-modified colorant and sealer for grout joints. It can be applied onto and bonds to cement, …

It is important for the existing grout to be porous and completely clean before applying MAPEI’s UltraCare Grout Refresh. So, the first step is to clean the existing grout using a heavy-duty tile …