1. A lot of this project can be made with leftover bits and pieces 1/2" Baltic Birch Plywood- main frame 3/4" plywood- front fork support...

2. Picture shows main pieces on a square inch grid for reference. On the finished product I modified the seat a bit and shortened the front fork pi...

3. The two sides of the frame form a wedge. With both halves touching in the front, determine how wide the back will be based on your rear axle. Th...

4. For the seat: Use 3/4" plywood to build an appropriate seat post. I chose an angle that allowed the seat to slightly tilt back when install...

5. Polyurethane or paint body. Lightly sand with steel wool. Enjoy!