To install vinyl flooring, you need to: ^{familyhandyman.com}+1 ^{2 1}

1. Prep the old floor to ensure a sound, flat base. Cut and nail down a smooth plywood underlayment if needed.
2. Make a template of the floor using masking paper. Cut triangular holes and tape over them to hold the paper in place.
3. Fit the template around the pipes or other obstacles on the floor.
4. Transfer the template to the vinyl and cut the outline.
5. Position the vinyl on the floor and adjust it to fit.
6. Apply adhesive and roll the vinyl for permanent adhesion.
7. Finish the seam and any other details.