reindeer applique pattern free - Search
Open links in new tab
  1. Rudolph the Red-Nosed Reindeer – a free applique p

    Cut a piece of background fabric and a piece of batting each 11″ square. You’ll trim it down to 10 1/2” square later, so it doesn’t have to be exact. If you’re using Quilt As You Go, quilt your block now. The quilting wouldn’t really show up on the busy fabric I chose, so I just quilted a simple grid and show it here from the back (batting) side.

    Shiny Happy World

    Download the templates here. Trace or print the pattern onto the paper side of the fusible adhesive. I use printable Heat & Bond Lite fusible adhesive so I just print out the page. No tracing! The image has already been reversed, so just trace or print.

    Continue reading

    Rough cut around each shape. Leave a little bit extra all the way around – a little extra extra (at least 1/4 inch) where there’s a dotted line. That’s the allowance that will tuck under other bits or into the seam allowance for a nice clean finish. Follow the package instructions and fuse each piece to the wrong side of the fabric.

    Continue reading

    Cut out each piece neatly. Cut directly on the solid lines. Leave a little seam allowance past the dotted lines (like at the base of the antlers and the top and bottom of the shoulders). Cutting after you fuse ensures that the adhesive goes right up to the very edge.

    Continue reading

    Trace any features onto the face. If you hold the piece up to a window, the light will make the lines very visible – even on dark fabric. I mark directly on any lines to be sewn (like the mouth) and inside the bits marking the appliqué position (like the eyes and nose). Here it is after tracing so you can see the eyes, nose and mouth marked. I jus...

    Continue reading
    Feedback
    Kizdar net | Kizdar net | Кыздар Нет