Apply Green Glue in a random pattern to second layer of drywall. Pull the trigger to dispense Green Glue in a random pattern onto the drywall. 2. Lift and firmly press second layer of drywall into place. Move drywall to location and screw into place (not nail). 3. Fasten drywall to framing following local building codes.

Quick 1, 2, 3 Installation for optimal sound isolation performance. Apply 1-2 tubes of Green Glue in 2 Lift and firmly press second Fasten drywall to framing random pattern to the backside layer of drywall into place. 3 following local building codes.of the second layer of drywall.

Green Glue has been specially formulated to “squish” the large beads into a thin layer (about 0.5 mm). It is usually more convenient to apply Green Glue to a loose drywall sheet at floor level (or sawhorses) and then raise the panel. Press the building material against the wall or ceiling and then screw it to the studs.

Installation is simple to follow, requiring only a drill and measuring tape and should only take a few hours for an average room. Begin by screwing Clips into wall studs; the hat channel is then snapped into the clips and drywall is screwed into the channel. A general rule of thumb is to install 1 Clip for every 5 sq. ft (1.5 sq. m).