This project calls for quite a few supplies. However, you can certainly use what you have around your house. It was free for me since I had everything in my craft closet! 1. Cardboard (I just used an old box or two.) 2. Packing … See more

Download the unicorn outline PDF, and the Unicorn Eyes PDF below. Print them at 100% scaling, and measure the 1 inch test square to make sure it is the right size. Cut it out along the black lines, and add glue to the grey bo… See more

These edging strips are what makes your unicorn pinata 3D. You can make it fat or thin based on how wide these strips are. I cut out my cardboard strips to be about 4 inches wide. Cut out many 4 inch thick strips of car… See more

Working your way around the unicorn, bend the cardboard strip and tape it’s edge to the edge of the unicorn cutout. The strips should be perpendicular to the unicorn. I found that bending the cardboard on the edge of th… See more