Whirlpool trash compactor problems - Search
Open links in new tab
  1. Whirlpool Trash Compactor Troubleshooting 2022 (G…

    When the latch on the compactor reaches the top of the trash can, it activates a switch that switches the power from flowing to the motor. The motor will keep running even when it reaches its highest point if this switch fails. To test whether or not this switch is faulty, use a multimeter to assess continuity. To initiate the compaction cycle, the...

    House Tipper

    When the door is open, a safety switch prevents the trash compactor from starting. The safety switch is malfunctioning. Test the safety switch for continuity using a multimeter to see if it is defective. Replace the safety switch if it doesn’t provide continuity when activated. It is likely that there is a problem with the motor of the trash compac...

    Continue reading

    Inspect the trunnion nut. If it is dry, lubricate it with the attached O-rings provided in the hardware box. If it is stripped, replace it. If the drive gear is loose on the shaft, you may tighten the mounting nut with a wrench. If tightening the mounting nut does not solve your problem, you can try tightening the set or replacing it if that does n...

    Continue reading

    If the latch is broken, you can use a putty knife or screwdriver to release the door catch. You may want to disassemble the drawer to remove it. Once you’re out of that situation, find and replace the broken latch. If the drive chain on your compactor is broken, broken off, or jammed up in the gears, then you will have difficulty using the compacto...

    Continue reading
    Feedback
     
    Kizdar net | Kizdar net | Кыздар Нет
  1. Some results have been removed